Is Your Netgear Router Blinking Red? Here’s What to Do!

0
337

“By the grace of God, everything was going well and I was busy enjoying my favorite movie on Netflix without any buffering. But, suddenly my Netgear router started blinking red and my happiness was short live. What should I do to fix this issue?”

Is your Netgear WiFi router flashing red too? Have been confused as to what to do in order to troubleshoot this issue? If the answer to both these questions is a big YES, then this post might be of some assistance to you. 

Here, we’ll provide you with the topmost troubleshooting tips to resolve the router red light issue. So, with no more discussion, let’s have a look at the tips outlined below.

Things You Need to Do to Fix the Netgear Router Red Light Issue

  1. Update the Router’s Firmware

Updating the firmware of your Netgear WiFi router is the first thing that you should do as soon as your router starts blinking red. The reason being, an outdated firmware is the number one reason leading to the red light issue. 

Here are instructions that you need to follow to update your Netgear router:

  • Open a web browser on your laptop.
  • Go to the routerlogin.net web page. 
  • Navigate to the Settings option.
  • Click on the Firmware Update button. 

And with that, you’ll successfully update the firmware of your Netgear WiFi router. In case you’re still facing the red light issue, then scroll down, and continue reading. 

  1. Change the Location of Your Device

If you have placed your Netgear router at the corner of the room, then it is recommended that you relocate the device. Place it at a location that isn’t restricted by thick concrete walls. 

Also, your router should be placed beneath or inside a cupboard. Otherwise, you’ll also get stuck with various routerlogin issues. Although taking this step will resolve the red light issue, in case it doesn’t, then go to the next step.

  1. Place the Netgear Router Away from Electronic Devices

Another thing to do in order to fix the red light issue is to keep electronic devices away from your Netgear router. The very existence of such devices can interrupt the WiFi signals of your home router. And you wouldn’t want that to happen, right? 

Thus, ensure that devices like cordess phones, Bluetooth speakers, baby monitors, security systems, and washing machines are placed far away from your Netgear WiFi router. 

  1. Keep a Check on the Ethernet Cables

To prevent your Netgear router from blinking red, check whether the Ethernet cables you are using are free of damages or not. If not, then make sure that you get the cables changed  immediately. 

If changing the cables, then it is recommended that you make use of a wireless source to connect your router and modem. Also, don’t forget to keep a check on the wall socket you’ve plugged your router into. 

  1. Perform the Process of Router Login Properly

Is your Netgear router still flashing red? In that case, the last to fix the issue is to reset your WiFi device. Sometimes, a small reset is enough to resolve technical devices. 

Follow the instructions outlined here and know how to restore your home router to its factory default settings: 

  • Press the Power button on your device. 
  • Disconnect all the devices connected to the router.
  • Perform Netgear router login to proceed further.
  • Navigate to the Settings option located at the top right.
  • Click on Backup Settings.
  • Select the “Restore the device to default factory settings” option.

Now, give your device a few seconds to get restored to its default mode. 
Note: You can also make use of 192.168.1.1 to access the Settings option to perform factory default reset.