In the past few years, as LEDs have risen to the top of the market for general purpose lighting and many fixture makers have begun to incorporate them directly into their product along with making traditional fixtures to work with light bulbs that can be replaced as well as linear tube.
In 2017 70 percent of the general purpose light fixture industry was attributed to either fixtures that integrate LEDs (often known as luminaires) or fixtures that are LED-ready (used with separate LED tubes or bulbs). In 2017 the latter accounted for majority of LED fixtures sold, however LED-integrated fixtures are expected to outsell the LED-ready ones and will make up the majority by 2022.
There are many advantages to incorporating LEDs into fixtures. However, it also creates new issues for the light industry might need to address in order for fixtures with LEDs that are integrated to become more accepted by the public.
How LEDs have Revolutionized the Light Fixture Market
In the majority of general-purpose lighting, fixtures as well as Light Fittings were manufactured in two distinct products for around 100 years. This was a perfect fit during the Edison era as well as a more into the 21st century, as for so long, the most popular lighting sources – incandescent bulbs or fluorescent tubes similar items – had very short lifespans. They were short compared to LEDs, which is.
LED lighting is unique not just because of its energy efficiency, but it also has a long longevity. Incandescent bulbs usually last for around 1000 hours – hardly an entire year, with a few hours of usage per day LED lighting is typically claimed to last for up to 50,000 hours or more that could turn into decades with the same pace of use. (Comparing the lifespan of two completely different technologies is a bit difficult, as LEDs do not suddenly go out as filament bulbs do.
The concept of a light that lasts for many decades is difficult for many of us imagine, but that’s exactly why LEDs are revolutionizing light bulbs. Instead of using light bulbs in the same way as other household items LEDs are making it possible to put in an illumination source and keep it for many years, similar to the roof or furnace. If the light source you choose to use can last for that long, then wiring it to the fixture as a permanent fixture is logical.
Manufacturers have plenty of Reasons to Integrate LEDs into fixtures
Fixture makers have a significant reason to incorporate LEDs into their fixtures the hope that it will increase your product’s value. So long as they are able to effectively incorporate LEDs into their production without adding excessively to production costs, the advantages that the lighting source with the fixture could result in an impressive net benefit.
LED integration can also provide a significant opportunity for fixtures. Since the beginning of time fixtures have, by necessity, been made to hold massive tubes and bulbs. But LEDs are small and can be utilized in modular units, which allows for an array of new designs. It’s impossible to predict what new styles are coming up for fixtures that are decorative (case in this case: Studio Job’s Huey, Dewey Louie, and Studio Job’s Huey Louie), however, among the practical options, many manufacturers have started to highlight the slim profile of of their fixtures. These include:
Furthermore, integrating fixtures with LEDs gives designers an opportunity to enhance the functionality and compatibility of every component of the product, which includes the lighting source. LED lighting employs a sophisticated collection of technology and typically has intelligent control features, which is why the majority of fixture manufacturers are able to enhance the interplay and connection of LEDs and the rest fixtures.
There are a few Possible Pitfalls for LED-integrated Fixtures
There are some concerns that could be raised by the rising popularity of LED-integrated fixtures, specifically for consumers:
LEDs set expiration dates for fixtures.
Replacing damaged LEDs can be difficult.
The current warranty coverage could make consumers feel disappointed.
Although LEDs might last for as long as a roofing or furnace, incorporating the light source inside the fixture could be considered as putting deadlines for its use on the fixtures. People tend to view their lighting fixtures as permanent fixtures, with long-term lifespans, provided they’re prepared to replace the bulbs. The purchase of a fixture that is LED-integrated comes with a risks. Although it is possible to last for many decades without maintenance, flaws in the product and failures are not uncommon. When the LEDs eventually expire (whether after decades or one or two years) they can be neutralized not just the light source but the entire fixture the fixture it’s embedded.
What happens when an incident occurs that causes an LED fixture is dimmed after five years, because some of the lights malfunctions? Electricians usually offer replacement for light sources as well as fixture repair services, however, with the variety of the LED lighting market is – and with no similarity to the uniformity of the conventional light bulb market replacing an LED module might not be accessible at a low cost. It will likely be more costly replacing the source of light only as opposed to replacing the whole fixture.
Also Read This: Custom Packaging Solutions: List of top stores for Packaging in USA
Although you may get reasonably priced repair service as well as a replacement module most fixture warranties won’t last for more than five years (and the ones that do significantly increase the initial price of the light fixture) which could leave users liable for the expense of repairing fixtures that incorporate LEDs. This isn’t really more than the standard warranties for roofing, furnaces and other large purchase. However, it’s different from the kind of maintenance that lighting for general purposes has needed for the greater part of the past century, and it could be difficult for people to understand that they’ll have to pay for a LED-integrated fixture that won’t last its entire life.
LED lighting has helped us to achieve great improvements in energy efficiency. It also has the potential to be more efficient and attractive than the lighting that was used in the Edison time. It isn’t clear how readily LED-integrated lighting are going to be appreciated by the general public considering how quickly the market has changed.
Light Fittings from AGM Electrical Supplies
Shop online at AGM Electrical Supplies for a huge range of Light Fittings, LED Lights and more. We have been supplying industry standard products to users across the country since 2005, with our vast industry experience you can be sure you are getting the best product available on the market today.
For More Article:
