Linksys RE6500 WiFi range extender helps you extend your existing WiFi range to the fullest. As soon as you are done with Linksys RE6500 setup, you will be able to get the internet even in those areas where WiFi was never expected.
So, now you might be wondering how to setup Linksys extender, right? Wonder no more! Here, in this post, we will provide you simple and easy steps to configure your Linksys extender without any hassle. Let’s get the ball rolling!
You can setup Linksys extender either using the manual method or the WPS method. Keep will guide you with both the setup methods one by one. Keep scrolling down!
Linksys Extender Setup: The Manual Method
Follow the step-by-step instructions listed below to perform the Linksys extender setup process using the manual method:
Step 1: Power on your Linksys extender. Plug it near to your home router.
Step 2: Then, grab an Ethernet cable and connect your Linksys RE6500 extender to your router.
Step 3: Wait for the power LED on your Linksys extender and router become stable.
Step 4: Turn on a PC or laptop and connect it to Linksys extender setup-xxx. This is the default SSID (WiFi network name) of your Linksys RE6500 extender.
Step 5: Open an internet browser as per your liking.
Step 6: Enter extender.linksys.com in the address bar, hit the Enter key and you will be redirected to the login page. You can use the default Linksys extender IP address as well to get into the login page.
Step 7: As soon as you get redirected to the Linksys extender login page, enter the RE6500 default password into the given field and click on Log In. If you have changed the default password of your RE6500 at the time of Linksys extender setup, it is recommended to use that instead.
Step 8: Linksys RE6500 Setup page displays. Follow the Linksys extender setup instructions provided on-screen and complete the configuring process of your device with ease.
Fab! You have successfully configured your Linksys RE6500 WiFi range extender. Found the Linksys extender manual setup process a bit tricky? Don’t sweat over it! Try the easy method to configure your device. Yes, you read it right! The Linksys RE6500 WPS setup method is one of the easiest ways to configure your device and revamp your WiFi experience. So, fasten your seat belt and get, set, go guys!
Linksys Extender Setup: The WPS Method
Follow the step-by-step instructions outlined underneath to setup Linksys extender using the WPS method:
Step 1: Plug in your Linksys RE6500 WiFi range extender. It is suggested to place your router and your Linksys extender in close proximity.
Step 2: Power on your Linksys extender and router and wait till the power LED on your devices become green and stable.
Step 3: As soon as the power LED on your Linksys extender and router becomes stable, locate the WPS button on your RE6500.
Step 4: Once you found the Linksys extender’s WPS button, push it gently and wait for at least 5 minutes.
Step 5: The WPS LED on your Linksys RE6500 extender will start blinking.
Step 6: Now, locate the WPS button on your home router. Once found, push it and wait for a couple of minutes.
Step 7: The WPS LED on your router will start blinking and become stable shortly.
Step 8: Unplug your Linksys extender, move it to your preferred location and start enjoying the internet to the fullest.
Kudos! The Linksys extender setup process using the WPS setup is successfully completed.
On the off chance if your router doesn’t have the WPS button, fret not. Simply configure your Linksys extender using the manual method.
So, in these 2 simple ways, you can setup Linksys extender and revamp your WiFi experience. In case you are having problems while setting up Linksys extender, feel free to get in touch with our experts anytime.
